KingMike |
Posted on 19-07-25, 23:20
|
Post: #24 of 36
Since: 12-21-18 Last post: 1218 days Last view: 127 days |
At least, going by the list in byuu's Twitter. "SMS 256x240" I thought the standard resolution was 256x192. What I had thought was that 224 lines was only supported by a VDP revision commonly known as the "SMS2" VDP since it was more commonly found in model 2 consoles. And possibly only PAL at that. At the least, the only games reported to have used it were Codemasters games, which I believe were made only for the PAL market. (and speculation on SMS Power has been made that maybe Codemasters developed their games on a later console without being aware of the difference). Not sure if 240 lines was even used. (was that also only PAL, or am I confusing it with the Mega Drive? I suppose it doesn't matter too much unless games used it.) |
CaptainJistuce |
Posted on 19-07-25, 23:50
|
Custom title here
Post: #588 of 1164 Since: 10-30-18 Last post: 74 days Last view: 2 days |
I'm not a Master System expert, but 240 lines does sound wrong. --- In UTF-16, where available. --- |
hunterk |
Posted on 19-07-26, 00:22
|
Post: #34 of 60
Since: 10-29-18 Last post: 1653 days Last view: 1575 days |
Wikipedia says 256x192: https://en.wikipedia.org/wiki/Master_System#Technical_specifications |
CaptainJistuce |
Posted on 19-07-26, 03:22
|
Custom title here
Post: #589 of 1164 Since: 10-30-18 Last post: 74 days Last view: 2 days |
If I'm not mistaken, the Master System VDP, like other TMS9918 derivatives, outputs a 256*192 image inside a 320-ish*240 frame. --- In UTF-16, where available. --- |
creaothceann |
Posted on 19-07-26, 06:35
|
Post: #175 of 456 Since: 10-29-18 Last post: 55 days Last view: 2 days |
Relevant: http://tasvideos.org/forum/viewtopic.php?t=19599 http://tasvideos.org/forum/viewtopic.php?t=15855 My current setup: Super Famicom ("2/1/3" SNS-CPU-1CHIP-02) → SCART → OSSC → StarTech USB3HDCAP → AmaRecTV 3.10 |
KingMike |
Posted on 19-07-27, 23:35 (revision 1)
|
Post: #25 of 36
Since: 12-21-18 Last post: 1218 days Last view: 127 days |
Did that thread just say NTSC gives us 256 pixels and some of the 288 pixels are lost from overscan. Because I sure remember on the SNES not getting even the 256 pixels visible on my CRTs as a kid. Sometimes losing as much as 8-16 pixels from each edge. Probably at least 8 of the visible scanlines from the top and bottom as well. (I recall Sega's docs told devs to consider at least 16 pixels from each edge of the "visible" screen to be potentially lost to overscan when designing games.) I know NES did 240 lines, but I believe as RHDN has noted for its reason for accepting 224-line screenshots is that it was common for devs to not even bother managing the farthest scanline data and leave garbage there, like "nobody will ever see it anyways". |
creaothceann |
Posted on 19-07-28, 07:00 (revision 1)
|
Post: #177 of 456 Since: 10-29-18 Last post: 55 days Last view: 2 days |
Of course the overscan varied from TV to TV, depending on how it's calibrated. The SNES does only 224 visible lines at most in NTSC mode. My current setup: Super Famicom ("2/1/3" SNS-CPU-1CHIP-02) → SCART → OSSC → StarTech USB3HDCAP → AmaRecTV 3.10 |
Kakashi |
Posted on 19-07-28, 07:20
|
Post: #162 of 210 Since: 10-29-18 Last post: 1888 days Last view: 1860 days |
In PAL land, we got all the pixels, but technically squashed. With a PAL60 mod, I got all the pixels, but I think my CRT TV at the time was too new to have much overscan. |
jjndig |
Posted on 19-09-22, 20:29
|
Banned
Post: #23 of 28 Since: 12-10-18 Last post: 1421 days Last view: 1421 days |
SMW was one of the only games that optimised the resolution to 240 lines on the PAL version right? Even DKC didn’t do that surprisingly :p |
Nicholas Steel |
Posted on 19-09-24, 06:10 (revision 1)
|
Post: #282 of 426
Since: 10-30-18 Last post: 510 days Last view: 25 days |
Posted by jjndig It's weird that they didn't do the same kinda optimizations for the other games in the Super Mario All-Stars collection, Super Mario All-Stars + World collection and the uh, collection that included all of them and Super Mario World 2 (was that a thing?) It's really bizarre going from the NES games which did take advantage of the increased vertical resolution, to the SNES games which squished everything. AMD Ryzen 3700X | MSI Gamer Geforce 1070Ti 8GB | 16GB 3600MHz DDR4 RAM | ASUS Crosshair VIII Hero (WiFi) Motherboard | Windows 10 x64 |
CaptainJistuce |
Posted on 19-09-24, 07:17
|
Custom title here
Post: #702 of 1164 Since: 10-30-18 Last post: 74 days Last view: 2 days |
Posted by Nicholas SteelWell, in the Nintendo's case, there was no option to NOT output all 240 lines(there was just an assumption that they were outside the screen on NTSC development). On a PAL system, all of those lines would be visible under all but the worst conditions. There wasn't actually an increase in resolution(much less support for PAL50's higher vertical resolution). Just increased pressure on developers to not ship stupid shit. In the Super Nintendo's case, there WAS a flag to suppress 16 scanlines and only output 224 lines. Which, since 16 of them "would" fall outside the screen seemed a really good idea. Again, to my understanding there's no actual support for PAL50's higher vertical resolution, so you're still getting letterboxed. There's just no longer that pressure on developers to make sure the first and last eight lines are clean, because they can actually be suppressed entirely. In both cases, everything was squished. It was still 240 lines in a 280-line frame, and pixels were less tall because of it. It is just the Super Nintendo offered the option to output 224 lines in a 240 or 280-line frame, and absolutely everyone used it. Unrelated: The Wikipedia article for PAL contains sections entitled "PAL vs NTSC" and "PAL vs SECAM". Neither the NTSC nor SECAM articles have similar subsections. This made me laugh. I think someone has an inferiority complex about their flickery TVs with their limited color space. --- In UTF-16, where available. --- |